PCMCIA ...Cardbus....

[laclasse]

CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller

This is what i managed on the 5660:
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Enabling device 02:07.0 (0000 -> 0002)
Yenta IRQ list 0000, PCI irq5
Socket status: 30000006
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x387 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.

The 3com pcmcia lan card (cyclone) 10/100BaseT works by loading the serial_cs module. The module the card uses is a full blown PCI Network Interface Card driver ( module = 3c95x ). Still no cash to acquire wireless one. Will do soon and test it. Comments appreciated. :D

[dirtboy]

Are you using pcmcia-cs or kernel drivers? Did they detect your controller correctly?

[laclasse]

Kernel drivers compiled as modules and inserted at runlevel 5, not before, or they confuse the kernel, at least on me. Hope that helps ...;)

by the way 2.4.21-pre4 kernel.

Good luck, post results......;)