New Posts  All Forums:

Posts by Geo

ChezTommy, please email TechSupport@SagerNotebook.com for the update. 1. It may have been updated again since May. 2. You should understand what a BIOS update is and how to install it before doing it. You can render your 8880...
Success at last! Used Norton Ghost to clone the failing 60G to the new 80G last night. Don't know what combination of the BIOS and Partition Magic 7 was to blame for the earlier failures, but now all is well and working. FYI:...
Finally received a new BIOS update from Sager (1.08) and now the drive is recognized as 80G. The old BIOS was part of the problem. The partition with W2K has always been "Set Active" by PM. Have checked several times. W2K...
The 80G used to be drive 1. I have moved it to drive 0. (and back since it won't boot there). When it is in the drive 1 bay, the jumper on the drive selects drive 1. When in 0, I remove the jumper. I don't think it is a jumper issue as...
I am attempting to upgrade from my 60G to 80G drive as the main drive. The 80G has been functioning fine in Drive 1 as f: I used Partition Magic to move the 60G data to the 80g and that worked and all files are present and...
The HD on my 8880 died last spring. It didn't stop working, but required a dozen retries on every read, so it just sat there going clunk clunk most of the time. I did an advance RMA with Sager for a replacement (asked them to make...
New Posts  All Forums: