Posts by basiliou

Finally is this issue interesting for someone inside here or i have to remove it since it is solved...???

For all you my friends that you ask details for Clevo M38AW, be informed that : Clevo M38AW (and possibly other Clevo Models) have TWO DIP SWITCHES for FSB Selection. The factory setting usually is for 400Mhz (Dip Switches in OFF)....

Guys the problem is solved. Motherboard and processor are fine. The problem was on the wrong settings of Clevo M38AW dipswitches (located under processor heat shink). My Motherboard was set to be equiped with a400MHZ FSB processor. If...

YEAP, in all identification utilities, including Startup screen , including My Computer Properties, the processor is indicated to be Pentium M 760. Where is my power ... oeo? Regards

NO. This processor, never run on 2 GHz. My notebook is almost always plugged in.... I have seen a lot of people herein with the same Motherboard and Processor combination. I'm wondering do they achieve the "promised" 2GHz?

Hi to all, Recently i bought a new notebook equiped with Clevo M38AW - with Phoenix NoteBIOS Ver1.05 Pentimu M 760 - 2 GHz 2 GB RAM Win XP PRO SP2 The problem is that since the processor it has been paid for 2GHz, the maximum...

Sorry guys, but i'm new in Pentium M 760 . Recently i bought a notebook that has a Motherboard Clevo M38AW with a Pentium M 760 2GHz (2GB RAM-WinXP SP2) Without changing anything described in your post , I can't get more than 1.5GHz...