Posts by bobfell

I tried my 7950GTX with the 90w brick for a while and wouldnt notice anything unusual until 20 to 40 min into hard gaming (F.E.A.R.) or maybe watching a movie and the brick would short out. I would not even realize it sometimes as it...

Quote: Originally Posted by rawr79 does anyone have the part number for the 7950GTX? The part number on mine is GU067 <br><br> Dell 9400/E1705: Core 2 Duo T7200 (2.0 Ghz) | 512 MB Go 7950...

zzpulp, I'm a bit of a novice at this so I'm not for sure, but I think things like running and jumping are dictated by your CPU and your system RAM. Only the video display is dictated by your GPU unless you put settings real high or...

Quote: Originally Posted by Luda for almost a 1000 point increase in 3dmark06 and being able to run every game i have @ full settings & 1920x1200 and get usually 100+ fps, the worst FPS im getting is ~40 in Rainbow...

How are you overclocking using stock Dell drivers? Did you flash the BIOS on you GPU?

Quote: Originally Posted by zzpulp If you have the classic control panel - Display Properties -> Advanced -> Adapter -> See if the memory size is 512 MB It says all the right things for the GTX...

Quote: Originally Posted by GNandGS You need a power supply... dont even bother with overclocking etc until you do. I want to add: Thanks to all replies and comments and especially thanks to mbosys and all...

Update: I downlaoded a mod driver from tweaksrus and tried to run some 3DMARK06 tests under factory settings. When I did, my results analysis showed the correct 575MHz/600MHz that the card is suppused to be set at but I was getting...

I bought a card off of E-bay that was supposed to be a dual pipe 7900GS to replace my X1400, I got it for $160. I thought that I would use this thread to help me trim the needed plastic to make it fit in my E1705 and that it should be...