Not sure what forum to post this in, so please move it if it's in the wrong place.
My 8887 died on me a couple weeks ago (no clue whats wrong, just powered off as if the PSU died) and no-thanks to my bank shafting me out of over $200...
Need a new AC Transformer for my Epson R300 Printer and Have no clue which one to get or where to get it.
it currently has a UK 240v in it which I tested on a 110 adapter before I moved back to the US and it worked fine, but now that I...
Put some Artic Silver on the GPU heatsink and my 8887 is running a lot cooler now, but I am still getting a LOT of artifacting on the screen which is progressively getting worse.
I have tried different video drivers (even...
Originally Posted by hanko panko
Do you have a small fan to the left of the RAM banks?
No but their is a square hole in the mobo to the right of the ram banks with what looks like a fan underneath.
Found the problem, it's not the CPU that's overheating, it's the GPU and RAM
it's never done this before and has ran better than this in hotter ambient temperatures.
Everything around the RAM anf GPU is clean and dust free so I have no...
Did that the day it arrived in the mail 4 years ago.
Hasn't overheated today yet but it is running hot (despite the AC keeping the Abient temp at about 70F) all I've been doing with it is some light Internet use, I have some word...
Before I start Yes I have Been keeping the Heat sink clean, in fact I cleaned it again this afternoon just in case (was still clean).
On the problem, Recently I've started having a bad problem with my 8887 Overheating, it seems to do...
Probably the Invertor, mine did the same before it died.
(using an external monitor atm)
BTW, how would you test a invertor to be certan it is the problem?
Originally Posted by ActuaryTm
As the inverter...