Posts by seaQuest

If I was to wager a guess, the shipped on the My Account page is when it has been shipped from the originating factory (Malaysia, etc) The main order status site seems to take longer to update, but should eventually give you a...

It seemed to track my orders fine.. (Although, it took a few days for it to show up) If you have an account on the dell.ca website, you should be able to link your Customer # into that account, and it would show you the order status...

Ordered from Small Business July 28th (on phone with rep), Optiplex GX620s arrived August 9th Latitude D820 arrived August 10th These did have a holiday in the middle, August 7th (NB Day here) Gerry

I've had an Axim X30 High since yesterday It's working great for me so far.

I believe that you had the option when ordering of whether to upgrade to a 90W A/C adapter. The 3.34 Amp adapters are 65W, which is the base configuration for an 8600. When I purchased my machine, I opted for a 90W, which is 4.62...

I got my remote from a local electronics shop for around $50 CDN. It also works under linux.

I've got a remote that was an ATI/MSI branding. In reality it is an X10 mouse remote. It doesn't work off of the IR port, it has a USB dongle that connects, and the remote uses RF to communicate (Doesn't have to be line of sight).

It took the onsite technician about an hour to dissassemble and reassemble my machine. (and took me about the same amount of time on the phone with tech support to convince them to replace the board)

Quote: Originally Posted by Lybydose1 "The startup problem" might refer to the problem I had with the 8600. Basically, when you push power, nothing happens, except that the capslock, numlock, and scroll...

I can confirm. My machine was originally 8600c. I had to get my motherboard replaced due to the startup problem, and they replaced it with an earlier 8600 revision. (I watched the tech do it, and there is a button cell battery about...