Posts by Eunix

Wow, I am just the opposite. I am trying NOT to have to send my 6811 back. Originally I called and got a RMA for the card reader problem. I figured it is a bad solder or something. The machine is not old enough to me to crack the...

Just a follow up . The Right Mark Utility seem to be doing the trick. I am running the Actual clock at 2205.5 and the Throttled clock is the same. However it is a shame that the default behavior of the machine is to run at 800...

Ok. I put two things together. (1) I downloaded the update from AMD (I think) for the 1.2.2.2 driver which would not update. So I gave up on that one. (2) I downloaded the RightMark utility after that to dink around with the...

I could not get the 1.2.2.2 driver to take. Everytime I tried to update the driver it would leave the version at 1.2.2.1. I downloaded the Right Mark CPU Clock/Power utility (V 1.6) and changed my multiplier (FID) to 11.0x and the...

Does this also work for the "cronic" problem with the M6811 that will Spin the fan and shutdown when you cold boot your machine?? Eunix

I have a similar problem with my m6811. I have a RMA to send it back for the card reader not working, but before I send it back, I wanted to talk to tech support again. The thing that they asked me to try did not help. I really...

I just wanted to give everybody an update on the case of the sick M6811. I have noticed a couple of additional problem: (1) Every now and then the system would shutdown when powering on [Potential Heat sensor problem?] (2) The...

I just wanted to give everybody an update on the case of the sick M6811. I have noticed a couple of additional problem: (1) Every now and then the system would shutdown when powering on [Potential Heat sensor problem?] (2) The...

Well, I don't really want to do that. It doesn't really give me a root cause plus I would have to start all over. Maybe after I create a bootable Ghost recovery CD of where I am today but Ghost has a problem with my DVD-RW disk. I will...

I suspect that it may be the card reader or poor connections inside. I have tried a Memorex CF, Serveral SD and MMC cards and a couple of Memory sticks. Looking at the side, I see that the CF and SD/MMC slots are on the same level. ...