Posts by Eunix

Thanks Thunder. Lets worry about it after I get this thing back together. Eunix

Quote: Originally Posted by Nhatters I don't know if there's a correlation, but this has occurred on two occasions already. Sometimes, the fan will not come on at all, and the whole laptop gets hot, including the keys....

Kudos! I still have my 9550 and I am finding it very difficult to retire it. It has been a good machine. But alas I fear it will not take Vista. But it is a great candidate for Mandrake, SuSe or RedHat! Cheers

Not sure if any of your are interested, but I replace my m6811 with a 7422GX ( And a Dell D810) after a coffee spill after an unexpected shutdown . The machine still works, but I also broke off one of the Heatsink mounting screws so I...

Lets start with cleaning the card reader. The Pins in the Compact Flash socket were not the same length. That did concern me but as I inspected the solder joints on the whole board, everything looked well connected. I will need to...

Well, I finally found the time to take the machine apart. I have to say that there are a lot more screws than in the Dell machines. No Pictures of the step-by-step disassembly but when I put it back you should be able to reverse...

Excellent Job! I will send you an email when I am ready to paint my classic Zcar restoration projects! Eunix

Good Luck. I found that my m6811 would be stable for periods of months even before I fired it back up. It has been replaced by a 7422GX (GW) after a coffee spill on the keyboard. I started rebuilding the M6811 and broke off a screw...

My apologies for being so long between post but I have been dealing with "Corporate Re-Alignmen" and I have not had the time to really work on this project. After I upgraded the firmware to the Targus Bios, I found that it...

Well folks, My m6811 still suffers from the shutdown problem but not as much. I have experienced some other eratic behavior so I am going to break the machine down and rebuild it to get it stable. My 7422GX is running...