Posts by TomD

The new Omega Drivers have solved the problem. They are based on the Catalyst 4.6 drivers, but somehow this version of the Omega drivers have solved the graphics problem that the standard 4.6 drivers could...

And another... http://www.twinbits.de/twinbits_V_Ki...mobilemod3.zip TomD.

Here's another link to that file... http://server.conitec.net/down/mobilemod3.exe It did allow me to get the latest drivers installed, and while the corruption was not as bad, it did return. Too bad, that's my LAN party...

HA!!! FIXED!!!! Here's how to get it all working... Download the new ATI Catalyst Drivers here http://www.ati.com/support/driver.html Then download this tool... http://www.davidhanefelt.dk/MobileMod3.exe Run the...

ATI has a fix for this with the v 4.6 Catalyst drivers, but you can't get mobility drivers from them, and Sager still has ancient drivers listed in their downloads. I tried the omega 4.5 drivers, but have the same thing. I tried to...

Maybe event viewer picked up something that can tell you what Windows is freaking out over. Control Panel - Administrative Tools - Event Viewer - System. Tom D.

Here's an article that describes what you're seeing. http://www.jimthompson.net/xphome/File_Sharing.htm TomD.

Hmm... Maybe you could boot to safe mode and uninstall the entire IDE adapter. That would force XP to reload the controller and all drives attached to it. In Device Manager on my 8886, it shows up as "Intel(r) 82801CAM Ultra ATA...

My 8886 doesn't seem to like Battlefield Vietnam. It has a Radeon 9000M with 64MB RAM. I have a a Gig of PC2100 RAM, 60 GB 7200 RPM HDD, P4 2.4, and it plays BF Vietnam at decent frame rates, just has graphics corruption. See this...

I would check to see if it is being properly identified in the BIOS first. If it does not show properly in the BIOS, I would check to see if the drive's jumpers are set right If it shows up OK in BIOS, you could try to uninstall it...