Posts by royceee

I just installed a D800 casing onto my 8600c and the trackstick buttons don't work. To make them work, I suspect you just need to locate the correct drivers/software. On my touchpad/mouse software (where you adjust pointer speed,...

Yeah - the keyboard is right above it but there is about 3mm of rrom to work with, hence Spike's Keyboard Flex mod... so i think making it thicker may help out with the keyboard flex... the only other concern IMO is the fins attached to...

ya - i think overtightening of the screws either puts too much stress on the gpu or it puts the casing to close to the those tiny components on top of the GPU and shorts them. If you were to place a thicker piece, let's say 3 mm to 4 mm...

Ok - so it's not a good idea to place copper close to those components on the GPU. That makes sense it's the motherboard's chipset... might as well add copper to that while we're at it. Has anyone placed a thicker piece of copper -...

Not sure if this has been discussed but what about a cooling mod for what lookslike a 3rd processor unit underneath the graphics card? When you completely remove the Graphics card, on the bottom there is another thermal pad that...

ATA-6 = ATA-100 Posted another thread that explains it... Here's ATA Hard Drive info http://www.buildorbuy.org/atapi.html Here's the other thread http://notebookforums.com/showthread...673#post318673

Excellent...thanks for the link, info, and help

Ok Thanks - Fixed the links. but does anybody know the differences between ata-6 and ata-100 what do the 6 and 100 mean ? I tried to find info on the net but had trouble so decided to post hoping someone knows

I have a Dell Inspiron 8600 and want to upgrade to a Hitachi/IBM 60GB 7200RPM Notebook Hard Drive, but there are two types ... Interface: ATA-6 http://www.newegg.com/app/ViewProduc...146-020&depa=3 Interface: IDE ULTRA ATA100...

I have a Dell Inspiron 8600 and wish to buy a Hitachi/IBM 60GB 7200RPM Notebook Hard Drive, but there are two types ... Interface: ATA-6 http://www.newegg.com/app/ViewProduc...146-020&depa=3 Interface: IDE ULTRA ATA100 ...