New Posts  All Forums:

Posts by css7716

I have an acer 2025. It has a Mathita UJ-825s driev which is slow, and only a single layer. I have found drive swap for macs that used the same drive and I was wondering if it would fit for my laptop as well. The Swap would be to a...
Im not sure if they would be the same length, but there is a stong possibility. Did you have any luck emaling the people @ that website I recommended?
Since the output to an external monitor works you can pretty much narrow it down to either the lcd panel or the monitor cable. If moving the monitor angle has a direct effect of the display then I would start with the cable. If you...
It should be under warranty from ibm directly
Not being familiar with your motherboard layout its difficult to say. There could be a second monitor harness to jump a segment of the board (where traces are not possible due to poor layout) however this is extremely rare in modern...
You can try contacting these guys. They offer diagnosis and they can usually get replacement acer parts for a decent price. http://www.notebooksolutions.ca/zc/ -Schiff
Let me ask this, is the lid opened and closed numerous times a day? There are basically 3 possible sources: 1)Monitor Cable (this is about $15-20) 2)Video Card Failure 3)LCD Failure If the laptop is opened and closed frequently...
I have never heard of an lcd flickering because of software. In terms of causes ... if the image remains constant but the lighting flickers it is usually either a faulty inverter or backlight. If it flickers into lines it is usually...
I went ahead and removed the cover which blocks the lcd cable and it looked like it was installed correctly. It IS held in by a screw but I decided to remove it anyways (just out of curiosity). When I pulled on it - it came out with...
i have a 2025 and as far as I know you can not remove the keys on my unit, I would venture a guess that yours is the same. You could remove the keyboard itself to allow for easier cleaning. The acer website offers a guide on how to...
New Posts  All Forums: