New Posts  All Forums:

Posts by Tricky

Hi Flatulatta I have a version 6.0 Mobo which has the same problem. I repaired it for a while by re-soldering the Promise raid controller. But since then it is now giving the message that no drives are found and the No Operating System...
Quote: Originally Posted by BFisch06 Wait, you have a 17" widescreen 1024 x 768 monitor panel?? I thought they would be 1440 x 900, 1680 x 1050 or 1920 x 1200?? Hi BFish06 Remember I constructed mine for...
Quote: Originally Posted by Metal-Box Thanks for the info! Very useful for the DIYers out there. Thought it might help others Tricky
Quote: Originally Posted by Argh what resolution is that screen? mine has the wsxga and i prefer this resolution over the wuxga. is it possible to put this screen in the m9750 since alienware does not offer...
Quote: Originally Posted by BFisch06 Thanks Tricky. I'll let you know what the number is. Hopefully you know which numbers correspond to which resolutions? Hi BFisch06 I will give it my upmoast. If I don't...
Please see attached pictures they show the sequence of taking the M7700 screen apart. Hope this helps BFisch06 Fig 1 Although I took my screen assembly off it can be done in situe. Fig 2 Rubber bump stop covering screws Fig...
Quote: Originally Posted by BFisch06 Hey, thanks very much Tricky! I'll wait for those pictures before I start, but those steps don't seem to difficult if I just take my time. I build desktops all the time, and I've...
Quote: Originally Posted by Hoshie My 7700 is now at the Paint Shop. Get it back at Friday.. Hi Hoshie Can't wait !
Quote: Originally Posted by BFisch06 In theory I can, but I've never taken a laptop LCD apart before. The machine is out of warranty, so I don't have a problem with taking it apart. Could you outline the procedure for...
Quote: Originally Posted by Hoshie I hope, my 7700 runs again and dont forget any screw.. I am sure it will be fine. There is plenty of help on this site.
New Posts  All Forums: