New Posts  All Forums:

Posts by DJ2liveUK

it sounds like a hard drive noise. it's stopped doing it for the past few weeks so fingers crossed the last update fixed it. Backing up all my data on a regular basis now just in case the disk drive dies.
thanks for the link, i have seen this but couldn't find the file hpcd.sys. however I have now manage to find it on the E: partition and have renamed. I also renamed the hp file on the C:\Windows\Sminst folder and I have succesfully...
Is there a way to make more than 1 copy of the backup / recovery DVD's for the Compaq NC6320. I have tried the normal route, but am told that only 1 copy can be made, which sucks seeing as the copy that I originally made appear to be...
remove the drivers that are marked via the device manager. then reboot the machine and let the drivers get redetected. If you have the option to search check online when the drivers are installed and you are connected to the web then...
yep, tried that and it does come back for a few power cycles, but then disappears.
this one seemed to vanished for 6 months but has now returned with a vengeance is there any way to determine whether this is a hw or sw fault?
Every now and again there is a loud beep from this laptop (Compaq 6710b) which sounds like it has something to do with the hard drive. The system does not stop, it hasn't fallen over and there doesn't appear to be any error messages...
Rachel did you get this fixed? It sounds like a hardware fault. I too have a similar issue on a TM6292 where the CD/DVD is no longer visible within My Computer or Device Manager and no end of tweaking has bought it back.
It turned out to be the touchpad was disabled in the control panel mouse setting. I only discovered this after remotely assisting the user via the internet. Thanks to all that helped.
Hi and thanks for the response. I have tried the latest driver from HP but that has not fixed the issue. The problem has been quite long term probably a month or so and I have just lived with it. I may try to check out the msconfig to...
New Posts  All Forums: