New Posts  All Forums:

Posts by bioart

cpu: 37-40 gpu: 42-45 dimm: 48 hd: 35 Other: 37 Of course, this is with a P4 2600, but I cant tell the difference (except, of course the benchmark numbers, but I dont care about that )... I'm looking forward to the increased...
I was considering replacing my 3.4 northwood with a 2.6... just to see what the battery life would be. I don't think I'd see that much real performance difference (I know the benchmarks will go down...) Thoughts? Art
Mandrake works quite well for me. The only thing that I haven't gotten is power management, but my display and wireless work quite well. If you need any config files, let me know. For wireless, I used the...
I've seen the same problem, and it goes away if I let the Dell utility control wireless. for some reason, WindowsXP sometimes takes over and that's when problems start... (Other than that, I've seen that if the card gets really hot,...
That sucks, but it makes sense... I guess that means the 120W adapters won't work...
Probably, IIRC, the built in IR is not able to decode regular remotes (at least without hacking of the drivers, which I have not tried). Art
One thing that will happen for sure is that the battery won't charge... I believe (have not tested it) that it will still power ok. Anyone tried it? I'd love to use a different PS if it was lighter and smaller, even if it didn't...
802.11a is not that rare, the throughput is higher than "g" and it uses 5ghz, which is less crowded than 2.4 (B and G). You may never need it, but if you have access to both, "A" is usually preffered (if you have...
ebay...
Does it automatically change profile between plugged in and not? Try setting it to max battery when connected (so that it behaves like it was unplugged). Other than that and/or a ground issue, good luck! Art
New Posts  All Forums: