Try the external monitor on DVI, VGA whatever.
now i ve been sleeping for the last 4 hours and i'm confused. Did you try to flash your VGA bios???
If you have done that, there is a major chance you f*cked up the notebook. A wrong bios...
Electrical shock means the mobo gets in some sort of freeze like status. It just have been not receiving enough electricity and it is a shock. When you unplugg your notebook(it is off) with the battery is still in electricity still is...
The mobo is in an electrical shock and can be took out only by another electrical shock. Unplugg everu chord from the lappy, remove the battery for 5 minutes, and then connect the battery and plug it in and see if it works
100C is the boiling temperature!!
Maybe 100faranheit. To remeber you 100C is around 230F.
NOthing can stay at that temp. The Presscots go up to 80C in full load with poor cooling, how can Pentium M go higher????
You click enable clock rate change.
You go up by small increments. For a start increase the GPU clock to 310 and mem to 205. Check for stability. Then go up one at the time the GPU and mem in small increments around 5MHZ. When you found...
It is not an esthetic mod, but a good one.
I'm thinking of putting a copper plate and glue it with a thin layer of AS5 to the GPU? Is this gonna help Overclocking and improve the cooling of the GPU?
This is gonna happen in an m505x