Good luck, just make sure your socket and bios are compatible with whatever cpu you get. I think you'll only be able to get a pentium dual core tops....
As for ram, well same deal, make sure it'll run at the right speed. The only way I...
Quote:
Originally Posted by dexster
geez, it does seem like too much trouble considering that past 2.33 it will throttle, but the killer for me is the loss of network card
anyway , im enjoying the t7600 & 7950gtx ,...
We did something similar to our bios chip at the uni, and it seemed to work fine. Mind you I haven't really used the lan port for a very long time. For my personal mod though I didn't have the equipment to carry that out back then, so I...
Quote:
Originally Posted by dave-p
It would not hurt to have the 130 watt power supply IMO, the newer GPU does draw more, and it can cause your GPU / CPU to down clock.
and if you go the T7600 route make sure it is a...
Oh dear.
Well,
the 7000 series graphics cards run the shader clock with the gpu clock, so the shader clock is actually 575mhz / whatever your core gpu speed is. So your correct, past 8000 series the shader clocks became independent for...
YEahhhh in the ati/nvidia control panels, there should be a colour correction panel. It should be easy to find by either looking in control panel or just right clicking somewhere on the screen and choosing properities or something...
Ummm. If you're getting errors changing the paste won't do much, it's probably already damaged.
Its a T8 bit, and if you clean the heatsink you can reuse the pads.
Don't get new ones, they're really tough to find.
