A cleaners tip...the plate under the keyboard has a bunch of paremiters screws that need to be removed. There is also a secret screwin the middle of the plate that is hidden with a date sticker...remove sticker to get to screw..Hope...
I bought a extra 2.5 harddrive and an enclousure. I have made a bootable clone and keep it updated so if my harddrive fails or I have to go thru what you went thru with your repair , I will be up and running in minutes. I am a pro now...
I called Warrentech last fall when my computer started to artifact badly. I was told to send my computer off to Ill. also, in their supplied box. Having read the warrenity card that was sent with my computer, I noticed that it states on...
forgot to mention that you should pull off and clean the tape they use on top of the GPUs. GET some thermal paste to replace the tape that they use, before you even start this project so you you not hate me for encouraging you..Good...
I have been drinking and I am not in the best mood but here goes. The cable that connects the key board is detachable....squeaze the sides or just figure it out like your life depended on it. next the plate does come out, first unscrew...
You have to remove plate under key board, ( paremeter screws, and center screw under the date sticker....remember too remove tape on chips and relace with a thermal compound...also the copper heat sink unit from the back is probably...
Inconel: where can I find the info on theM10 and M11 having the same device ID of 4E50 ? Sandra utility shows under AGP BUS 1 (2xPCICIK) ...Device = Clevo/Kapok computer Radeon Mobility M10 NP (RV350)....OEM device name...ATI TECH....