New Posts  All Forums:

Posts by gypsyhick

I have a problem and hope someone can tell me the possible cause. Here's the deal. I have a problem with my 6809 dvd combo drive. It will not read the end of any burned DVDs I have made. More specifically, I can watch all but the...
http://notebookforums.com/showthread.php?t=36342 That link should answer or lead you to answers for any questions you have about the ground loop.
This is a common problem when connecting a laptop to other equipment. Check out this link: http://musicxp.proboards27.com/index...num=1088431832 It is has everything you can possible want to know about the subject. I had the...
Thats' great you were able to exchange to the 6811. I have a question about the rebates. Did you already apply for your rebates before you made the exchange? If so, do you know if they will still honor them? Or do you have to fill...
Been doing more research and I have found out that this ground loop problem is not specific to eMachine laptops. I wanted to vindicate the eMachine lappy. Here is a great thread which leads to more threads that talk exhaustivley about...
I believe you when you recommend these Arima drivers, but where is the info that states the W730-K8 DTR is the same as the eMachines M6809? Another question. Why wouldn't eMachines list these drives on their support page? One...
It sure is alot cheaper.
Thanks for the advice on the isolation transformer. I found one that seems to fit the bill for the m68xx ground loop problem. Here is the link: http://www.jkaudio.com/pureformer.htm What do y'all think? Cheers, GH
I've recently used my laptop through a mixing board into a PA and when playing back music with the outs of both the Echo I/O card and the laptop's headphone jack (which is basically a stereo line out) I have gotten noise. I also...
I am re-posting my reply to: http://notebookforums.com/showthread.php?t=32099 Just wanted to highlight the Audio Noise problem to peak any computer audio guru's interest. I too use my m6809 to record audio. Instead of using a...
New Posts  All Forums: