New Posts  All Forums:

Posts by beakmyn

From what I can remember: The remote is part of the TV tuner card package which is an Avermedia TVCapture 98 card using the BT878 driver chip (at least on the 8886) your may be different. It's been awhile since I used the TV tuner...
I think BT8x8 remote drivers are still in development you can try the aver helper dlls. You can also try bremote http://www.borgtech.org/btv/bremote.php
Yes, you're right. For some reason I thought Michael was the guy that ran Go-L then I remembered it was supposedly run by some lady.
I've seen these in use on smaller screens but never on large screens. I'd like to know how clear the image. Since our Sagers run at higher resolutions the glue and plastic would have to a pretty low index. The idea is good, you...
Just to be devils advocate. His best story is from a guy who lives within 2 hours of him? Is it his sister's husband's brother? I didn't think this company existed 3 years ago, that was started off much of the 'vaporware' thread. It'd be...
I did some googling and found these files go along with a hardware dongle for licensing. One of the programs that uses it is WSCAD a "CAD-SOFTWARE FOR ELECTRICAL + ELECTRONIC ENGINEERING" It could be you're using software...
I'd really like to see and hear that subwoofer! Unless it's at least 6inches in diameter your note going to get anything near subwoofer frequencies. I had a Nissan truck with an OEM 'subwoofer' in it. Once I took the POS apart I found it...
I thought that square was put there by the RIAA
Yes I believe you need the tuner card installed as I believe the video capture hardware is built into it. I used my 8886 to do the same thing and worked great. Remember S-Video doesn't have audio so you'll need an audio cable too.
Most LCDs have some lighter area around the border due to the backlight. It'd be nice to have an actual picture of the screen. Here's a link to Sager's Pixel policy: http://talknotebooks.com/showthread.php?t=1591
New Posts  All Forums: