Posts by evilminion

Quote: Originally Posted by qhn . most used method, booting into the recovery console then - C:\WINDOWS - CD .. - FIXBOOT C: - FIXMBR - BOOTCFG /rebuild . "old" partition magic should work cheers...

All, I have an ACER 5610Z (US) that I replaces Vista with XP in Linux. Due to various reasons I have removed Linux. (No problems - just work priorities). I wanted to give Vista another try. Before going to XP I backed up my...

All, I have an Acer 5610Z that is dual boot into Linux and XP using Grub. Since this is my machine that I also use at work I wish to remove the Linux as I don't use it on this machine. (It was an experiment). (I do use...

On my machine (5610Z or 5610-2013) that slot has a US WI-FI card. Is is possible the UK or a later version uses the PCI-e slot? and mine uses the mini-pci? Evil Minion

Just a quick note: I put a PC2 5300 2GB moudule in my system and it worked! However it will not work if any 1GB module is in. I need to get a 2nd 2gB module and test with two. Regards Evil Minion

Miky, Your system has slots for 2 memory sticks. According to Crucial each slot can have a 2GB stick. PC2 5300 is faster than the PC2 4500. However, the system will run at the speed of the slowest memory module if the speeds...

Miky, I think one difference is that I have a US Spec 5610Z and you have a UK spec 5610 (WMLI?). These are not quite the same machine. \ I got my 3.24 BIOS off the ACER Europe site. I don't quite remember, but I think that was the...

Miky G, I have a 5610Z here. Last year I tried a 2GB module that I had here at work, and the system would not even boot. However - I am a BIOS developer for a company that makes tablet and ruggedized computers. I use the NAPA based...

I just flashed 0F08.P02E and still nothing. I guess I will have to return the CPU to the vendor.

Thunder, No sign of post. Thje power light came on but that's it. No beeps or anything. I just downloaded 0F08.P00 and will flash it after lunch. I prob will try P02E if that doesn't work. Also the OPN...