Posts by boombyte

Hello. 1) Do you prefer to build your own PC’s or buy a branded system? b) Prefer to buy a branded system --(laptop) 2) How often do you replace or upgrade your PC? c) 18 months – 2 years 3) How important do you feel an SSD is...

And? nobody not tested?

I have interest about temperature GPU with max loading (benchmark, game like Crysis etc).

I can sell it...but I have very interest tested card with more powerfull AC (130 or 150W). And but shipping from ebay this adapter so long...and need buy it... If you wish I can sell card now because now I not buy adapter yet. After...

I think thermal paste contacted fine with heatsink. But I try again check this. What is AUX temp in Everest? Hardmod backlight? How this possible? Test with Furmark. 7900GS give 8-12 FPS 1280x1024 without AF\AA FX3600M give 55-61 FPS...

Try powermizer in the nvidia control panel? What is? Now I flash bios A10 and those same...no effect. But when sensors says temperature going over 85 C then Everest say 70-71 C (like in A09 bios so those same with A10). I touch...

No. Drivers install correct with no problem. All programs (GPU-Z, everest, Furmark) detected this card normal. Windows detected it also. But I not have 150W adapter. May this is wrong? And I find trouble with backlight...

what with GPU temperature?

07-17-2008, 12:56 PM felixbrenner i can't overclock much higher than 620/900, atitool starts showing artifacts from this point. 600/900 is a good artifact free sppot for me. however, my temps @ 620/900 didn't get higher than ~76°....

I read in this forum one guy have 76 C max with this card even with overclock ( http://www.notebookforums.com/thread216225-3.html ). 77 C going after 2-3minutes when run Furmark. And this not max,,,if further testing temp maybe over 85...