Posts by randomblame

Quote: Originally Posted by bosslee Just made the right images path (all uploaded to forum) , hope this helps... Yesssss! Thank you now I understand how it was done. I'll be getting my new d600 on saturday...

as far as memory timings work for those that were wondering - the bios will still believe the ram is running at pc2100 speeds even though it is not. It will use the spd tables from the memory for pc2100 - making it unstable at the high...

Quote: Originally Posted by qhn Did you take some pics? cheers ... I figured out the method by reading the data sheet on the pll, that's the good news. The bad news is that the method I found required...

got it apart, my board is revision a03 and seems to be missing the part that says 102 right above the ics chip. My board also uses the ics 950810cg pll I cannot tell what you did in your picture it looks like there is a wire soldered...

Can someone repost the pictures? The images are gone. Sorry to bring up such an old thread, I'm just stuck with a 600m at the moment and I'm trying to make it useful in the year 2010. If someone still has their modded 600m/d600 lying...