Posts by OShadowFoxO

Hi StevenJDM, That temp. is very hot (the 60-65) even for a mobile chip. It sounds like the cooling setup is compromised. Depending on the laptop's assembly/disassembly, you may want to try and open it up and clean out the heat sink...

Welcome to the forum, CharlieSierra24! And you are quite correct... A related note is my own experience, which is that replacing a dead or damaged motherboard with a new (or refurbished) one does not automatically provide the correct...

Hi Ssay, What is the name of the user account with Administrator access? Is it your user account, or is it the actual Administrator account? If it is NOT the actual Administrator account, we can try that. Let us know which is the...

Hi Oklo, HP's parts website is often incorrect. They listed incorrect parts for my C503WM and the listings for my DV9700 CTO were vague at best For example, instead of searching by part number I went to the listing for system boards...

Hi Oklo, I own a 9700, the same machine essentially. The problem definitely screams motherboard to me (since the GPU and motherboard are inseparable). You are right that the tilt issue could be a cable problem, but I experienced a...

Hi, Is it possible that something is pressing or has permanently pressed the button that disables the mouse? Normally those functions are separate, but I have had my DV9700 keyboard stop responding as well if that button got pressed too...

Blah, how did I miss a C500 post? XD Anyway, yeah, just remove the wireless card after removing the memory cover. Additional bit of info: It's a standard C2032/CR2032 watch battery, same as most desktop boards. Gone (for the most part)...

Hi, QHN is right on, basically. You're in that grey area of battery life for Li-ION batteries. It's even money whether or not you'll be able to salvage it, you may have to just replace it. In that vein, I would only add to QHN's advice...

Hi again, So the confusion was mine. This is often the case! Just some other notes on the application: When putting a bit of compound on the CPU, I usually push out just a tiny bit onto the center of the core. For an exact amount, it's...

Hi again, I'm going to throw a slightly edited picture of yours in here because in reading your post I think there's some confusion and I want to clear it up. My apologies if the confusion is entirely mine. Here's the picture. I...