Posts by lwgray

Even though you mention the odor without the battery in, you might want to pursue this: http://bpr.hpordercenter.com/ebpr/landingpage.aspx They know of battery related problems.

I saw what appeared as water spots on mine and feared some type of defecct. Turns out just a little water and a microfiber cloth took care of the spots in short measure. Do your spots appear to be on the surface or part of the LCD display?

Ordered my DV8000Z on 1/24/06, with an expected build date of 2/6/06. Got a tracking number on 2/2, and the machine is sitting at a Fedex sort facility about 70 miles from here. My guess is it'll be here tomorrow (2/6). Not bad at...

Quote: Originally Posted by Eunix It is not a matter of "feeding" Lawyers, but a company should not have the luxury of putting out an inferior product. ... If a class action was filed against eMachines, it...

Outside of what's posted at the lawyer's site, I haven't heard of this problem, but it seems that the 5300 series has to do with overheating, then abruptly shutting down. My problem (and what I've read from many people here) is the...

I started this thread, and was reasonably happy that the problem appeared to have been fixed after an RMA replacement of the motherboard. Started happening again, and I am totally frustrated with this machine now. I've still got 4...

First and foremost, head over here: http://www.broadbandreports.com/forum/dlink for any and all of your Dlink questions. Dlink tech support is mostly useless. It sounds like you have enabled AR and/or XR mode on the router...

These should work fine (probably better than factory drivers): http://www.omegadrivers.net/

Radio Shack - about $2. They won't match the existing footings, but you get a sheet of about 2 dozen. Just put a set of four evenly spaced on the bottom and you'll be good to go.

Quote: Originally Posted by lwgray Only had the machine for about an hour, so I won't go so far as to say it's fixed yet. I'll report back in a week or so... Well, it's been that week or so. No problems...