Posts by englund33

Assuming it is the GPU-chip you can use flux and try resoldering the chipset depending on how good you are. works on xbox 360.

Hello Again,   This is the most simple way.   1. Buy a cheap inverter for a single CCFL (7$ i think)   With the specification: Vin max atleast 19-20v. Vout above 600v     2. Chop the...

I went the simple route and bought a inverter according to the spec i could meassure from the inverter and a pot for adj, driving it with the original vin and usb. Another way is just to use a pwm for adj. Ofcourse it is a more...

ITS ALIVE! i tried to film to get some proof but the quality is not that good... will upload to the tube. Edit: http://www.youtube.com/watch?v=ldedEg5HmiU   I think i will try to flash it to a 9800m gt

I have started to tear down my lcd to try feeding the ccfl, Im down to these pins :   - SMB_CLK          SMBUS interface for sending brightness & contrast information to the...

Sounds like it is time for a bake. I got BSOD's(memory bla bla) and vertical lines on my go7800, decided to bake and after it booted just fine allthough it lasted 8h. I dont understand the design of the cooling plate, because it...

Hi, i have also got myselft a 3600m but i will probably go the hardware way and feed the inverter with a separate source. My problem is that i bought a e1705 with a burned gfx, does all bios for the e1705 support the 3600m (support...