Posts by Gray

Aussie, Several internal screws were loose. Screws on drive brackets. screws holding cd frames, case screws, etc; once I got started, I just tightened everything. I did have to make some decisions about the missing screws and where...

Ok, Just got off the phone with Sager Tech. Blinking lights means it is getting hot inside. Thanks to G-Omaha, I cleaned the fins,(God I hate it when I miss the obvious) and I'm back up and running. A couple of quick notes: ...

Probably somewhere in the packing material it tells you to pull the fins out and clean them. Full of dirt. I just hope I haven't hurt the CPU. I'll post what Tech Support has to say. Huh, I wonder if it's time to bump up to a 3.6...

Well yesterday I got a new one. The NumLock LED and the CAPLock LED blink constantly. Since I cannot feel air coming out of the unit I can only think that this means overheating and one of the cooling fans has moved south. Anyone...

You have a set of jumpers under your keyboard that will disable the RAID. If you look on the CD for your System or System book, there is a section that will show you the proper settings

Good suggestion, I'm embarassed I didn't think to try this.

I'll see if I can find the error log and post it. I saw an earlier post telling me how to find it I'll take a picture next time it shows. There isn't a set amount of time between the BSODs. One time it may be 10 or 12 hours and...

8890- Great Machine. I am getting the BSOD several times a day. I have downloaded current drivers from Sager. Any other thoughts? Memory checked using Microsofts' download and It found no errors.

I guess that's why you're a Senior member and I am just a Junior member. I really do appreciate the help.

I'll try that but I can't believe I'm the only one with an 8890 who has run up against this.