Posts by Hammerhead

This doesn't sound like a hardware issue. It sounds like a firewall issue, or spyware/trojan that's stopping security and updates, or could be a misidentification of a component when you first ran update. Do you have any...

AW has all the drivers available on their driver download page. The drivers are dependent on which operating system you have. Here are the drivers for XP. Here are the drivers for Vista. The memory and bus controller are in the...

Could be the cable to the lcd, or the inverter. Can you take it apart enough to make sure the cables are well seated and not loose?

Only thing I can think of is to get a usb wireless adapter... I think the slot is built into the motherboard, so you may need to replace or repair the mobo. The Clevo d900 has mobo issues, and they aren't making them anymore, so I'm...

Testing the embed... http://www.youtube.com/watch?v=dh3bl...bum_id=4804627

Heard this and thought of Boyd... Do you know Boyd, Cleofizoid? Seriously, do you know Boyd...?

It may be the previous driver causing the issue. Unfortunately, I don't know how to advise you to remove the previous driver. I assume you've disabled the adapter in device manager, and rebooted to make sure it uninstalls...

The possible upgrade vid cards are dependent on the motherboard revision you have. The original revision will only support the 6800go, newer vid cards required more power than the original board could provide, so they revised it a...

Quote: Originally Posted by mymojo82 i get mid to upper 60ºs when i have my window open in my room and the temperature is about 50s (ºF)? outside. but in my studio, which has the heater running, it runs about...

The cpu temp is fine, the gpu is high... littlefrankus and AlienRod are both correct, I'd take the back off, remove the vid card heatsink(s) being careful not to damage the pads on the memory chips, then clean the gpu chip and...