New Posts  All Forums:

Posts by Compman55

Neither will work with our factory bios. The microcode is not there for it. Will the sempron work? Maybe. Will the turion work? No! A member tried for months here to modd the bios and got it to boot into windows, but it would lock...
Don't waste your time with a power brick. It is not the problem. The issue is the motherbaord power supply circuit. It goes bad over time, it was probably spec'd too tight from the engineers. I have replaced a few boards on these...
*1/20/09* No ill effects found running this combo. However many have emailed me regarding the use of a 4000+ which is the fastest newark core, and also have been asked about support using a genuine emachines bios. To answer this,...
Quote: Originally Posted by sledge Hey, thanks for the link. I tried to flash the NS5 version using winphlash v1.6.5.6 and v1.3 build 56, but it doesn't work. The hard-drive led blinks while it is supposedly flashing the...
Has anoyne tried a Sandiago core used in the 7525gx in the older 7400 or 6800 models? Newarks only go to 4000+.
BTW, Vista did not like the change. A restart IS required or you mouse will be very laggy, sound will be cracking, and stuff will open real slow. Once it installs the processor driver, all seems well.
Well folks, I finally got around to installing a 3700+ newark in my 7405GX. The benefits to using this CPU is the added SSE3 instructions, faster clock speed, less overall battery draw, and less overall temperature generated, not to...
I can get an emachines m6805 chip that states: 49LF004A 33-4C-NH Not sure if it will work. I have an NS bios on my 2 7405GX's and a non NS on my emachines. I have noticed the NS bios motherbaords seem to have a 49VF chip and the...
Any of the m68xx or 74xx will work. I would prefer the chip to say the following: SST 39VF040 70-4C-NH
Yes, thats how I found out they have the ns.00.05 however it is listed for the 7422gx and that only have a 3400+. How about the 7426gx, I would think it had the newer bios.
New Posts  All Forums: