Posts by g_bruin

I finally figured out why my videocard was shutting off. I had hooked up the videocard to a molex connection on the motherboard. Well, apparently, the motherboard doesn't put out enough amps so it was shutting off the videocard. As...

I do have ramsinks! I had just added Swiftech's ramsinks last weekend and the exhaust fan. Even with the ramsinks, I still can't get 3dmark to finish. I'll get a couple more fans and also try to mount a smaller fan onto the card to...

Temps so far have been great on the cpu and gpu. However, the ambient temp is higher than it was before. It is hovering about 45-48C. Also, I can't seem to run 3DMark without the card shutting off. I know it's because the ramsinks...

MDA by T-Mobile. Ordered it yesterday and should be arriving on Monday. It is replacing my Nokia 6600 Smartphone.

My rad is mounted via a swiftech radbox which can be used to mount 80mm fan and radiator. The rad is not actually mounted on the case (I hope that is the question you were asking). Although I dont think there is room enough on the...

I hear you Yang and totally agree! Thanks for the advice, I am taking it all in. I have been searching for a temp monitor,flowmeter and info display ala Aquaero. As great as the Aquaero is, it is designed for small tubing so...

Here you go! Click on my sig to see the rest of them.

Thanks guys! The tube is slightly flattened to get through the PCI slot. I was willing to drill two holes but it looks pretty good for now. I did notice that once the system warmed up, a pinch developed from the DD to the reservoir...

Just completed as of today!

Thanks. It wasn't after I bought the rig that I realized I should have skimped on the processor and upgraded the videocard. Oh well, I got a great deal on an older generation card.