Posts by messat

In fact I use custom made fan powered externaly by a adaptor with 7different voltage settings and I have made the propeller myself from an old cd.I ran it on 12 volt dc motor but i rarely bump up the voltage.I suppose that you can use...

I am in Bulgaria now and it is getting very hot in the room I'm working in.Although I have cleaned the fans my 9100 was getting very hot-63 for the gpu and 61 for the cpu on idle or if I'm listening to mp3.Yesterday I decided to remove...

yes they are the same

view>cpu history......

Yes.It does everything I need.I hope it will be alive and kicking for at least two more years till I finish university

Try to reseat the card,check the temps but it sounds to me as a bad card.I overclocked my card a little bit more than I should have a couple of times and now I can't overclock at all.If I try I get artifacts in CS:S.

Its a very good job I think but I do agree that the rasults are prety poor.Some people have better result simply by changing to Northwood

Pumping cold air over hot computer parts shouldn't cause condensation

It will not lead to any condensation.Water condens on colder surfaces because these surfaces cool the air close to them.The cold air can not hold as much water vapour as the hot does so it deposits water on the cold surface.If there is...

Good job.but I thought that whatercooling 9100 will give better results.What you are getting with the watrecooling in the meaning of lower temps is about the same as with northwood processor.Do you think it will be possible to fit a...