Posts by aussie

In the words of one great sage: the speaker determines how confused an audience is... Ok so it is a OQO 01+ - good. Win XP Pro - good - is the Windows Key still ok? Not been moved/copied to another system? One thing I forgot to ask...

Exact specs on your unit would need to include: Model: (01 or 01+) Disk size Memory size OS (XP Home/XP Pro/XP Tablet) Protection plan purchased (are these transferrable?)

On the OQQ - you say the specs on your unit may not be those you listed. So given that OQO had several models with smaller disks mem etc what are the EXACT specs of your unit. Second point new models are going for $US1199 why buy...

the boot ram tester is not that thorough. best test is something like http://www.memtest86.com/ good luck with getting the system to work.

JimM, if you enter the BIOS (F2 key) on boot up and leave it running just on a BIOS screen does the system stay up or does it reboot? If it stays up then your CPU and basic system are ok. With windows you may have a memory...

Not sure I like this new layout. Too many distractions.

it would probably fit but again the same comments apply even more so. Given the cost of the CPU ~$600 (vs even $225 for the other one) you would get more bang for you buck by putting the money towards a newer laptop. CPU is only a...

You need the Socket 478 device. Only one device worth getting: the 3.4GHz 1MB chip. http://www.memory4less.com/m4l_itemd...temid=27105443 I doubt if you will notice any real difference between the 3.2 and 3.4 chips. My suggestion...

yes. the kit includes the circuit board (with screws), insulation cover for the disk, side mounting brackets (with screws) (see first photo) and flex bridging cable. There is a filler plate already mounted inside the carrier piece (see...

bridge is only part of the kit janzy. you also need the circuit board pictured. i should have been more specific in my post.