Posts by cjdshaw

There are PCMCIA to PCI breakout boxes, like these http://www.amplicon.co.uk/dr-prod2.c...ternal+pci.htm I don't think USB or Firewire would have the bandwidth`

http://www.google.com/search?hl=en&q=mimo

I think you have to activate it in the BIOS. It may be referred to as IrDA or 2nd serial port

Mine's been working fine since I got it a year ago.

Hmmm. I've checked my Fastbuild settings, and I have 2 arrays, each a 1 disk stripe. Obviously a 1 disk stripe doesn't mean a lot, but it works for me and Norton Ghost can see my drives no problem.

Shouldn't need to reformat. A quick way is to go into the RAID Fastbuild settings, delete the array and recreate 2 arrays, each of one drive. You'll then end up with two identical drives, each with the same Windows install. Format the...

Yup. It has a standard Kensington lock socket at the back of the right hand edge

I haven't had to use it in a while (touch wood). I seem to remember it doesn't support PnP, so try plugging in the USB key before you boot.

Personally, I'd put Bart's PE on a CD http://www.nu2.nu/pebuilder/ boot off that, copy the files you need, either via network or a USB hard disk, the reformat the machine. Once a machine gets into this kind of state, it usually not...

Thanks for the info. I might also look into a CompactFlash or PCMCIA adapter. That way I can leave it in all the time without it sticking out.