Posts by catsonar

Ok, so besides being a smaller die and saving me battery life, What performance gains do I get compared to the 65nm Memron besides a bigger cashe, 6mb?? compared to my 4mb. Also, where can I get this cpu?? I looked on Newegg and I...

Hey, Just finished putting my new 16mb 7200rpm 200GB HD from Hitachi in yesterday. Took me about 10min from unscrewing to screwing back in everything. Its on your left hand side of the your laptop, towards the front.

You can put Penryns in socket P's???? WTF

Quote: Originally Posted by kent1146 1) It is relatively easy to access both the CPU/GPU, and the hard drive. Both are accessible from panels at the bottom of that laptop. 2) You will want to use at least a 200GB...

Quote: Originally Posted by keypad Voiding your warranty and potentially wrecking your system is not the best move. I would say doing a HDD/Ram upgrade as it's straight forward enough might be worth the risk but artic...

gerryjoson I used GPUZ to see what my shaderclock was at but for some reason it had it blank. Steange. After googling it, it said that 8600M GT has a shader clock of 600. I could be wring though as that is what I read. Going to check...

Quote: Originally Posted by eclypse3demons There is probably only one real reason, the driver you are using requires an .inf file with it that tells the driver that your card is supported for that driver. (IE if you...

Hi everyone, Just to let you know, I'm aware that OCing in a laptop is not adviced as for the heat. I willing to take the risk and only OCing a just a bit past stock settings. My question, Why do the laptop2go.com drivers...

Hi everyone, Just wondering if by any chance anyone here has opened the casing to the M1530 yet. I bought mine with the 120GB 5400 HD cause I wanted to upgrade it on my own to the 7200rpm 200GB 16mb HD SATA150. I have put...

I thinking that you mean an 8600M GT 256mb GDDR3. The 8800 is currently found in very few models, for which the 1530 is not one of them.