Posts by Visseroth

Hey BCloud, figured out the problem yet? has any of this software worked for you?

Well I knowticed that it has been a while since anyone has posted anything, but I thought I'd let you all know what's up. Well, I changed my system over to XP Pro because I found that Media Center had some problems with my hardware...

driver versions shouldn't effect the speed of your processor, so I would be checking some where else. Have you had any luck finding a BIOS update?

I guess the only other thing to check would be to see if all your drivers are current. Do you have all the latest drivers for your NB installed? Oh, and I'll post the picture as soon as I have a chance to take a picture

Here is my recommendation..... Go into the bios settings and set the performance to conserve battery life. You should be able to find it in the performance setings. That'll make the PC perform at a straight 800Mhz (Pentium M...

I am running the 3790, but they should be very simular, Go into the bios and check to make sure that the bios is set for "Best Performance" or what ever it says. Basicly you're trying to get maximum performance out of the...

Oh, one last thing. If you are getting low wireless performance try one last thing. Check that your router is set for the highest performance possible. For example. My router was set at 1Mbs to 2Mbs so my performance was so so and I...

Quote: Originally Posted by erisalit32 Visseroth many thanks and some rep points to you for the advice. I will try that out. I am pretty sure the problem was caused by Zone Alarm somehow though because I never have...

Quote: Originally Posted by SKim Overall the wireless performace for Sagers are very low. http://www.pcmag.com/article2/0,1759,1742070,00.asp "Wireless throughput was unacceptable, as the unit couldn't connect...

be sure that you don't have the IP address limited. Commonly the IP address start with 192.168.0.1 or .1.1 but if you set the IP address range for 192.168.1.1 to 192.168.1.2 so that one machine will take .1.1 and the other .1.2 then...