New Posts  All Forums:

Posts by steve4112

Anyone need any 9860 parts? Motherboard is shot so dont ask for that. I have the 17in screen which was in good shape. ATI x800 video card. Pentium 4 3.2 processor, 3 gig ddr2 533 ram (2x512 2x1gig), 1 Model SN-s802 DVD slim dvd...
Well I took it apart after I went ahead and bought a new computer and found that where the adapter plus in on the underside had a tiny circuit blown / fried. I figured as much but had to find out for sure. I am sure it would have cost...
Well at this point I guess I could as right now it is a 15 pound paper weight. I did take all the covers off the bottom and didn't see anything burned. If it is the power board how would I tell? I took the heat sink off and looked at...
I have a Sager 9860 (D900t) and I believe it died today but would like some other opinions. I got on the computer this morning and all of a sudden I heard a strange noise and the computer shutdown. I smelled a slight burned...
Thanks for the post. I sent my information off and I will see what happens with it.
yeh i have been to Sager's site and have looked at the drivers but I dont have any clue as to what they are. It says 8.13 but that doesnt match anything close to what I have in my notebook. It runs fine and I havent had any problems...
I have a 9860 and am not sure what the current version of the video drivers are out, I have a ATI X800 video card. I looked in the device manager and it says the driver version I have is 8.172.0.0 and a file version of 6.14.10.0296 but...
Thanks for the reply I will check them out. I dont know if the warranty is still good after taking it out of the enclosure or not but oh well because I already did to do some trouble shooting. I dont care at this point as long as it...
The problem is I am in Germany and it cost a lot more to reapir here then in the states. I need to send it to the states.
Hey has anyone used the Cooler Master laptop coolers? I have seen this but as far as I know it doesnt come out until later this year, but I was wondering if anyone used the 2 fan version and does it...
New Posts  All Forums: