Posts by hvstacey

D600's are sold with both XGA and SXGA+ resolution displays. You can find what display yours has on Dell's web site (support.dell.com). While there may a simpler path, the link to "my systems & peripherals" will lead you...

http://www1.us.dell.com/content/topi...=19&l=en&s=dhs

It doesn't indicate directly which USB standard it supports however the highlights tab does state that the network interface on the unit has 10 Base T port which suggests it does not support USB 2.0.

The more expensive unit supports a USB 2.0 connection to the computer; that means the network interface is 100BaseT (100 mbit/sec); the other two only support USB 1.1 which limits the network interface to 10BaseT (10 mbit/sec). If you...

I haven't seen the current generation first hand but I've owned Inspiron 7500, 8200, 9100, 600m and Latitude C840 and D600. All of the machines are used and transported daily to and from clients offices. In my opinion, the D600 is the...

Try the following link daily.webshots.com The have great photography, have widescreen formats, and offer a free membership.

I'm a developer and use a I9100 with 1920 x 1200 resolution today. I like the large screen and resolution of the I9200 but have decided to forego it because it is basically a single hard drive system. The optical drive is fixed and...

I'm running a dual boot 9100 but both partitions are XP Pro. I started with an unpartitioned hdd, then let setup create the partition. I simply repeated the install for the second partition. I've been told you should install...

I don't see why the 1450 would not work in the I8200. I had a dual band wireless mini-pci in my 8200 when I sold it. As I recall though, there is only one antenna in the 8200. I've been told in the past that you can use either antenna...

I have a gigabit network in my home that I use to move data throughout the house for backup and data replication. The cable cost just about the same, my 8 port switch cost under $150, my 5 port switch under $100 and the desktop NICs are...