Posts by lucidchaos

Reaver, I forgot to mention, you the man, man! That's one fantastic score that sets you apart from those who won't open up their lappy... And that's better than a stock XPS2! Not to say the XPS2 isn't worth the money, I'd love to...

I plan on making one. I'll write it up during my 23rd hour of prime. Although intel's white paper is more than sufficient. They have all the vid pins grouped together diagonally with grounds above and below them. Also do a search...

Quote: Originally Posted by IRobertus I can't do it and it's driving me nuts. The closest I can get to 5000 is only 4782 no artifacting. If I try to raise my clocks past 401 3dMark just freezes. I have the 76.50...

Quote: Originally Posted by slcya Hey Lucid...is this the processor you got with the "buy it now" and included shipping? I am the Ebay seller. (BTW, how about some feedback) Man I knew I should have hung...

Ok thanks, that's what I suspected (but i was hoping to hear otherwise ) The new game plan is to run prime on several voltages and see which is the most stable. I realize now that I probably can't run 100% stable at 2.66. However, I...

Intel's pentium m datasheet: http://download.intel.com/design/mob...s/30526201.pdf There are two diagrams I found very helpful, one is the voltage chart on page 18, another is the pinout on page 35. One more trick I did was making a...

You have to figure out what the voltage is yourself using the voltage table on intel's whitepaper.

I tried lowering my voltage to no avail; looks like 1.660 is the lowest I can take it. Been running prime for an hour now, and i'll let it go another hour before I re-assemble the whole thing. TSFroggy, you can see pictures of the...

I just applied some AS5. Load temps WERE 77c @ 2.53ghz @ 1.596v w/ no thermal, things are now looking stable at 77c @ 2.66 @ 1.660. I have been running prime for about 40 minutes now which is much longer than it would run...

Before going to bed I set the multiplier to 19 and grounded vid4 and vid0, had it going stable all night, was delighted when I got up and didn't see any errors So 2.53 is stable... now to address that extra 133 mhz... btw it failed...