Posts by digitanium

ok you guys here's the problem. turn over your laptop and look at the bottom where the subwoofer is located. I suppose you know where the problem is now. the subs's located on the left. so that's where the bass comes from. however, bass...

got it to work finally . i don't know what was wrong . i kept swapping processors and kept on trying...again and again and again.....finally i got it to boot up . running at .796 V-1.34V . CPU temperature fluctuates like a SIN wanve.. up...

Quote: Originally Posted by Allistah When you press the play button on the front of an Inspiron 9300 when it's off, it will turn the laptop on and display some Dell Media logo. Then when it gets into windows it will...

Quote: Originally Posted by Allistah If you take the voltage jumpers out does it still do that? If it does, i'd try one step up from stock and if that works, go from there and see if it crashes. If one step up from...

Quote: Originally Posted by Allistah No man.. Look at the chart. Your stock voltage is 1.34v. On the 1.34v line, you'll see that vid0, vid1, and vid2 are all a 1. Now look at the line for 1.42v. The only...

Quote: Originally Posted by Allistah For 1.42v I think you need to ground VID0 and VID2. Verify and make sure, I just did this this morning and I'm pretty sure 1.42v is 0 and 2. Erm I see what you're doing ....

Quote: Originally Posted by Allistah You need to raise your voltage. Use the pictures on the first post of this thread to find out which ones. The black dots are ground. Try setting your voltage to 1.42v and see if...

help!!! . I got my P-M 1.7 today, did the pinmod at c 15 and 16. Bios reports 2.26Ghz, memory 533 Mhz. but I can't boot into windows. I get a blue screen once i type in my password. But it runs fine in safe mode. I see that my default...

ok thanks fot the help andry nude, but I'm wondering, how do u find the plane liveries from PAI ? They look really really bad. Some of the engines look like hexagons or octagons i'm dead serious. textures are very blur too. I tried...

thanks for the reply angry nude. pai does not give that man liveries for commercial jets, espacially if u were to look at the ones in the picture above. what settings are u running FS at ? here are mine : 1920x1200 terain mesh...