Posts by Wingit

Thanks for the reply you have been the only one so far as to help. I have been to the clockgen site but there are no downloadable links as far as ics clocks. I did go to the setfsb site and he was very help full in getting me set to...

Hello folks, maybe this one won't get deleted. I was wondering what the clock generator is for the 3.6ghz. 9860-s Sager Notebook is or could someone point me in the right direction under the hood. Thanks Is it ICS 954119

Hello folks, I'm runnung a 3.6ghz with 3meg mem, and would like to see if there is more speed waiting to get out. I tried using the Glockgen program but it will not find my PLL file, is there any other software out there to tweak or...

Was wondering if someone could help with the location of the PLL file for the D900T (9860-S). It is being listed as ASUS P5GDx, CG-ICS954119. But there is no link for the file on the ClockGen site, or it's not possible to do this...

hello guys, sorry to jump in on this, but what are you using to adjust the FSB (Software or opening the lid)? And could you point me in the right direction as to were to get it. I have the Clevo D900T (9860-S) 3.6 ghz FSB 800 mhz

I made a boo boo I was trying to connect my tv to the lappy with svideo port in the rear, and it was not working. after calling the Sager support line and talking with the tech. he said to use the svideo (in) which is on the left...

Hello folks, I'm trying to connect my TV to my 9860S and having no luck. I have the svideo cable pluged into the computer and into the TV but nothing happening. Is there something I missed?

I found this one on another site, this might help you Quote: Since the Windows installation on a 9860 or other laptop with a RAID controller can be tricky regardless of whether or not RAID is used, we've included...

Here is what I did This is for ata set-up, Not the Raid setup Remove the Hard Drive cover, 4 screws Set the jumper on the drive to cable select. install the drive. put the cover back on. boot up, the bios scren showed...

Thats strange my driver shows 2.3.5.18