Posts by g00nter

Basically: all 3 have the same CPU & chipset all 3 have the same 512MB of ram, but it appears that #1 has another 512 for frree. I would not make this an issue since ram is dirt cheap these days, and like saugen mentions, you...

in addition to saugen's advice: 1. Are you absolutley sure the two sticks are both 1GB each and not that they add up to 1 GB? 2. Are you sure the laptop can use 2GB? Download and check the detailled specification sheet from...

If you look closely, there are often numbers next to the pins, sometimes only next to some of the pins. If not, in this orientation: Reading from left to right, the top row are pins 1 - 13 and the bottom row, pins 14 - 25

In the control panel in windows' power optioins is the scheme set to "Toshiba Power Manager"

The cable in the first link will only work if your TV has the color component in (you use all three RCA connectors for the video in on our TV, one for the red channel, one for green and one for blue). If not you'd be better off with...

hey saugen, Have you tried burning a copy of the disk using a "newer" optical drive? I've had disks that I can't read in my laptop's drive (I always assumed due to scratches) be readable in my "new" external DVD...

I think the error codes you refer to are the flashing sequence of the power indicator. If the power indicator is flashing (not just turning orange, but actually tunring on and off), it should be doing so repeating a series of 8 either...

Does the power indicator light blink at all? If so it should blink a series of 8 long/short flashes that are repeated. This code can be interpreted into a diagnostics code.

IIRC you can't manually adjust the memory allocation in the intel integrated graphics (I'm not sure about others). It does it for you based on how much system ram you have installed. At least that's the way it was with the older cards,...

No worries. I have the M2 and it still has a parallel port, so I'm assuming yours does as well. In that case your best (and cheapest) route would be to build a parallel port password removal key. Check out these threads LINK or LINK...