Posts by montyrobison

Sanatarium, Thank you, Thank you, Thank you!!!!! This was just driving me crazy. I was beginning to think there was some kind of hardware failure. For anyone else having the same problem the toggle to turn the WLan on and off is...

Hi, Does anyone out there have a BIOS upgrade for a Sager NP4020 / Clevo D400S? The current BIOS is a Phoenix version 4.06, revision 1.0C. Any help with this would be appreciated. Monty

Hi ohn, I'm not quite sure where to find and download the chipset driver you refer to to. Can you provide some more detail? Thanks!

Could you please explain why you moved my post and just exactly where is it? When I click on the "tech support" shortcut you provided it takes me to some AT&T advertisment. Thanks for your reply.

Hello, In my list of devices there is an exclamation point under Other Devices - Mass Storage Controller. It states that the drivers for this device are not installed. Can anyone out there help me with this issue? I can't seem to...

Hi, The video display on my 5620 DS has been acting up lately. The pixels randomly get a streaky/blotchy look and some of the desktop icons are blurred out. Any ideas out there on what may be causing this? The video driver on this...

Steve, As it turns out go to your system bios on POST and under your Power Management settings change the setting from Suspend to Disk to Suspend to Ram or Power on Suspend and that will get rid of the error message. Thanks again for...

Hi Steve, Thanks for your reply. I actually have another old drive that I installed Windows XP HE on to test on. I still get "a double beep" and error message that states that the suspend to Disk partition signature is not...

Hi, I just purchased a new HDD for my Sager 3360 and I'm needing some help on how to partition the Suspend to Disk portion of the HDD with the 0vmakfil.exe program. I'm going to be running Windows XP Home Edition. Any help and advice...

Hi, Does anyone out there have or know where to find a spare hard drive caddy that will fit a Sager 3360 (AKA a 3300C I think)? I would prefer a caddy complete with the HD connector. I'm wanting to setup 2 separate drives that can be...