Posts by jasn

Quote: Originally Posted by saugen48 Kinda weird, I have a Satellite A70 and downloaded this program and tried to run it but got a splash box saying that This is not a Toshiba, does not have a fan, or is not supported....

I don't have this laptop so I don't know for sure but I would go to the Windows XP control panel and select the IR control panel, and look for a disable there. Good Luck..

It's not impossible. Just not easy. It might be worth pinging Screentek (http://www.screentekinc.com/index.shtml) and seeing if there is a 17" WUXGA, (there's no such thing as WUXGA+), screen compatible with the P100. However note...

Quote: Originally Posted by nadav2605 So i'm looking for something that will resemble the OS X operating system by it's look and useability. These are two very different areas. Looks are easy. Most Linux...

Ace, The bluetooth class profiles specify the wattage and distance bluetooth devices can communicate over. So a class 1 device supports a Maximum Permitted Power of 100 mW or 20 dBm, and a Range of approximately 100 meters (see...

Tender, To answer your question from my own experience. I have had two laptops, one an Apple, and one a Toshiba, which both stopped charging. The problem was determined to be the charging port on the back of the laptop, and in both...

Is the Tecra A7 BIOS manufactured by Toshiba or Phoenix? I'm trying to determine the Linux compatibility of an A7 I have on order, and the Toshiba BIOS has historically better support in Linux. Please someone report from actual hands on...

The only A100 specs I could find in the US, (from Toshibadirect.com), don't list an A100 model with an X1600. The best you can do there is either the Intel share memory GPU, or an X200 (I think). If you do a build to order model of the...

mongoose, You probably already know that in order to get a P100 with the 7900GTX, you have three models, two of which come with the Copper lid. Toshiba has pre-configured these three models, and there's no changing the configuration on...

Try adding "rootdelay=5" or "rootdelay=10" to the kernel parameters. This will make the system wait for the specified number of seconds before mounting root, hopefully long enough for the device to be fully initialized.