Posts by ziddey

how do your temps look? it soundsl ike it might not be fully stable at 2.26 with the stock voltage. happen to jot down the batch number? maybe it's an earlier one. that said, if it's stable enough to get into windows initially, you can...

Quote: Originally Posted by JETninja Ok, the $23 1.6's were gone, so I picked up a 1.7 off Ebay. (like $40 shipped) Couple Questions. The more detailed link (from the original poster in his post) is dead. I would...

my heatpipe is busted, so I'm looking for a new heatsink assembly or the whole x300 unit if the price is good also looking for a cheap used dvd burner since my nec 6650 kicked the bucket

I've posted about this before, but the problem is extremely problematic now. Heat is concentrated at the gpu and isn't traveling down the heatpipe. Even with low power mode for the ati and underclocking, it's still hard to keep temps...

oh believe me. i've taken everything apart. and if the heatpipe wasn't broken, it is now when i tried to pry it off, although temps aren't any different.

For some reason, my heatpipe is broken, and if I keep it on max performance mode, idle temps in 2d will slowly creep up to around 70'c. If I go in 3d, it'll go up towards 80 until it locks up the system. If I keep it in laptop battery...

As I understand it, where vss (gnd) is used to drop bsel to low, vcc (vcore) can be used to bring bsel up to high, instead of insulation / pulling pin. Still wouldn't change anything about eist/c1e forcing 6x.

Quote: Originally Posted by dgcaste I must have read between 90-95% of this thread and I have yet to see someone run a good CPU benchmark between the stock 533's and the pinmodded 400's! Anybody out there? Or if I...

Shielding and cutting off acheive the same purpose. The OP did shield it with an ata ribbon. And it was a good thing, since it looks like EIST is going into some safety mode and forcing 6x, which more or less is defeating the purpose....

Quote: Originally Posted by hyperx so even if I insert pin into socket - nothing gonna happen? No! Nothing! It really should be bulleted in the first post exactly the criteria needed is. I've been with this...