Posts by ziddey

Quote: Originally Posted by the_scotsman Its in and going! Wouldnt get into Windows @ stock voltage. I shorted F1-F2 and F3-F4 (VID1 & VID?) I also applied AS5...CPU idle temp @ 30!!! (even though its forced to...

I was correcting him in how the overclocking is done in my earlier post.

Who said anything about 8% 166->200 is a 20% increase. 2.0ghz becomes 2.4ghz And you get the higher fsb. When I got my i6000d, I got the 715 1.5ghz. If I wanted the 760 2.0ghz, it would have been like an extra $600 or something...

Here's the problem. With the old dothans, the first model that came out was 400fsb. Then the new chipsets came out with the faster 533fsb models. This meant that there was a way to trick the old 400fsb models to run at 533fsb in the new...

The i6000 was actually really easy compared to a lot of other laptops I've dissembled. The wireless card is very easy. Open the screen and fold it all the way down. If you look at the top gray bar (above the keyboard. the one that says...

yes, it's called speedstep. it switches you between the max multiplier and the min (6x). back before you did the mod, it should have been 6x100=600mhz. now it's 6x133=798mhz.

Yeah, I voted for that. Still hoping. Also, anyone know how to get the ability to bind mouse1+2 = mouse3 in win2k3? There used to be an option to do this in the alps control panel in winxp but installing the same driver in win2k3 for...

hmm how come some people have it working??

I have a tm350 in my i6000 along with an atheros ar5006xs and a motorola h500. The signal I get is only ever good when I place the headset right on the laptop. If I have it on my ear, it always drops to barely acceptable. If I type on...

I do have back/forward gestures selected but don't have the option to set corners. Also, it seems like I don't have the option to set both mouse click to mouse3 (middle click) ever since I installed w2k3r2. Does anyone know the registry...