Posts by lizard_boy

This happened to me, two things to try: 1) Right click on taskbar, go to TOOLBARS, check Windows Media Player if that's an option. 2) If it's not an option, you have to "reinstall" WMP. It's still there, you just have to...

I have the 1.6 i6000D, x300, 1GB Ram (Kingston 533 512x2) and Doom 3 is *playable*. Everything is turned down almost all the way, but the game plays fine - it's not choppy, no stuttering, no lag. It doesn't look great, but it's really...

Quote: Originally Posted by turtle* question. is there a way to make that detect MMC's? generally most SD stuff works on MMC and vice versa. But MMC off my nokia phones wont detect on my 9300 I just tried a...

I forgot to update this thread. I installed RMClock to test out undervolting my Dothan. Now I just set it to "maximal" (1.6Ghz) before I launch UT and it runs just fine. It will also run at normal speed if it set it to...

Quote: Originally Posted by AxonIDI Is it normal that my processor's clockspeeds go down to about 600Mhz when i'm testing for the Minimal VID? I just started at the lowest which is 0.7V. Which model?

I've got a linksys WRT54g and haven't noticed any lag playing UT. Put the Sveasoft firmware on there on you can boost the signal to meet your needs.

Quote: Originally Posted by AxonIDI After getting the maximal and minimal VID. Do i need to uncheck the P-state Transition thing? Do i need to run RMClock during startup and throughout the usage of the...

Quote: Originally Posted by mich43L I say don't. Run RMClock 1.5 as opposed to 1.4. 1.5 tell you to restart the computer when you check/uncheck the HLT checkbox so you'll probably are not noticing the change if you...

I posted the same question in another thread. My 6000's drive stays between 45-50 degrees. Right now, CPU is at 38.5 degrees, hard drive is 46. This is with Prime95 crunching away as I test my undervolting. Edit - forgot to...

Great thread, I'm still testing, but with my 1.6 on my 6000d I've got the Maximal VID all the way down to 0.940. I'm holding steady at 38 degrees with Prime95 churning away. One question, what is a good temp range for my hard drive? ...