Posts by hardeep

Juason the port with the red glow is your spdif out. It is an optical signal which sends out a 5.1 sounds signal to hook up to a speaker system with an optical input. Anybody who has the sound issues it is basically electrical noise...

you can get rid of it by muting stuff like the mic and line and stuff when it isnt being used in the volume control panel. i had the same high pitched garbage and turning the random stuff off fixed it.

That is definately NOT the chirping fan noise. It is definately something hitting the fan blades.

My laptop isn't a Sager but from a UK vendor who don't like they're stuff fiddled around with firmware. Especially if its from the US.

I know this subject has been repeated time and time again but I need a bit more help please guys. I have installed the key board firmware that stops the chirping fan noise but I want to replace it with the old one (1.00.02) before I...

Thanks mate Ive just e-mailed you for it. The pctorque version 1.00.93 is no good, hopefully yor offical version will do the trick.

Off subject slightly, has anybody installed the non fn key swap KBC/EC update 1.00.93 and noticed that the fans always go to top speed for a second before slowing down again, bit like when you first switch it on but slightly louder. It...

Thanks alot for your advice mate. I realised how much of a bootleneck it was when i installed identical programs on both my desktop and the laptop and it took double the time to install on the laptop which is a 2.8GHz P4 compared to a...

Ive just installed the firmware for the fan speed control, but i find that when the fans start to go to a moderate speed they initally go to full whack first. Is it not possible for it to go straight to the moderate speed rather than go...

myrkat when you say the 4200 is quiet does that mean the 7200rpm HDD is quite loud? I already have plenty of noise issues such as the dvd/cd-r drive which is awefully loud but I dont think i could put up with a noisy HDD as well. The...