New Posts  All Forums:

Posts by JMorgan95385

I think the NSF bios is newer than the 0F08.P00 ( Prior to reading this th though there were only two different major revisions of the bios the 0F/52 that were used on the older machines and the NS series that is used on the newer...
The second system, does it have a version of windows that supports NTFS? I dont think that Win 9x or ME support it. The tools that you used to try to repair the drive shoulnot have erased the partition. Have you tried accessing the...
Quote: Originally Posted by dkuntz I have this issue, sort of. My E doesnt come on... Except when doing datatransfer. Not sure why. I updated to newer broadcom drivers, from HP (using the base drivers, not the HP...
Does the (<e>) ever come on during the boot process? I have swapped out my broadcom card for an intel card, and have noticed that instad of the e staying on solidly instead it pulses when it is transmitting/ recieving. good...
Also double check to make sure that your SD card isnt locked/write protected... Good Luck, James
Also check your bios settings, see if there is a selection for a PnP operating system, if it is enabled, try disabling it or vica versa... Dispite windows being a "Plug and Play" operating system, i have found that often the...
Does the machine powerup with out the battery? If so I would rule out a bad power connector. Maybe a bad battery connector from the m/b ... or maybe a bad battery (A friend of mine with a 400s killed his battery by leaving it on the...
WHat specs does it call for... according to amazon : Quote: # Windows: # Microsoft Windows 98/ME/2000/XP # Pentium III 600 MHz or Athlon 600 MHz processor or higher for systems with Windows 98/ME # Pentium III 700 MHz or...
If your machine is in warrenty maybe tech support can give you an RMA to replace the drive... Good Luck, James
Sounds like your drive is broken... I havent really had this happen to me (at least not abruptly, I have had a cd-rw drive in a desktop slowly go out). I replaced my factory burner with a NEC drive in my m6811.
New Posts  All Forums: