Posts by Camel Spit

If you have the S8 firmware or higher you won't need Get Thermal. The S8 firmware has the optional fans 2 full speed. FN+F2 would activate it.

If your being plagued by a black screen, then you need to check a few things. My 9880 died on Saturday because the voltage regulator fried. Clevo needs get their circuits right. Check these: Video card: Make sure it's clean,...

A lot of people are having problems with there laptops voltage regulator burning up. Mine just burned up, I've had my 9880 for 1 year and 10 months. That pic on the other page is exactly what it looks like. If you laptop isn't...

Well, it finally happened to me. My Sager 9880 is down for the count. My voltage regulator fried, and it smelled really bad today. Ok, so I usually save my info on my external HDD. Well, there is one paper that I didn't save. I have...

Yeah, I usually clean it out every 2-4 months. However, if you live with pets or in a dusty place then the cleaning should be done every 1-2 months. I don't have any pets so my dust in minimal. The artic silver only has to be...

Actually, all of these procedures will not void your warranty. No seals or stickers are broken. This laptop is made for this. If you open your video card physically then your video card will be void. If you open up your laptop you...

I've been reading about lots of people having problems with overheating with their mobo, CPU, and video card. I will list a few things that you NEED to do to keep things running, at a good temperature. 1. Clean all of your fan vents...

This strange noise that you hear is common with these power supplies. They are about 220 Watt PS's. When your hard drive runs you'll hear the PS working, same thing when you use your mouse wheel. That is because it's drawing lots of...

I reverted back to the S8 firmware but kept the 1.00.10 BIOS. It's not the BIOS thats the problem, it's the firmware. The firmware 1.00.09 is crap. When I played any kind of game it would just shutdown my whole laptop after I played...

I had something very similar happen to my 9880. Make sure you have your pagefile set to a descent amount. For the amount of RAM you have set it at 1533 for the initial and max. I noticed that when I installed the latest firmware...