Posts by andy A

This may sound stupid but are you sure that there is a bluetooth card etc.. installed?? You would get the message described above if one were not. It is possible that one was not installed even if a bluetooth device is listed in device...

Scrimp, If you mix 3200 and 2100 they will only run at the 2100 speed. The P25 motherboards run in dual channel so it is advisable to run 2 identical sticks of the same speed, capacity and brand. I don't think there are any DDR...

Epastor, Took awhile but finally got 2 sticks of PC3200 working in my P25. It recgonizes them as 3200 and runs them at PC3200 speeds in dual channel, with a 1:1 divider vs the 3:2 for the PC2100. I am using the Corsair...

If you can find one the Toshiba MK5024GAY is a nice drive although on the small side for capacity at 50 gb's it does have a 16 mb cache & rotates at 7200 rpm. Price is a little high also aprrox 200. Have been using one in a P25 for...

We purchased one of the A85-S107 for the grandaughter a couple of months ago on the no tax weekend for 450. Is a basic machine and a good little machine, no complaints so far, does what it is supposed to for the specs it has. I did...

epastor, I tried 2 x 512 OCZ 400512VSO, PC 3200, 2.5-4-4-8 sticks. Machine recgonized them no problem, ran at 3200 speeds and changed the divider to 1 : 1. But got random crashes, so ran memtest and got lots of errors. Sent those 2...

looking for service manual for satellite p25

think I may have figured it out if anybody can confirm. I was under the impression that the internal bluetooth was some type of built in internal card but in doing more research it looks like the bluetooth device is a SD II bluetooth...

Having problems with internal bluetooth. Does anyone know where it is located on a P25. It shows in device manager and the latest drivers & software are loaded but I keep getting message " Could not open Bluetooth ACPI device...

another quick question will the divider change automatically from the 3:2 with the pc2100 to 1:1 with the pc3200, since there are no optons in the BIOS to do this. Andy