Posts by toronto-m6805

Hi there. I have a Toshiba Satellite A110 that I just upgraded to 2x 1GB of Corsair PC2-5300 ValueRam. CPUz shows it only running as single channel but I thought it would run as dual channel. The crucial memory advisor says that the...

Yeah, I've pretty much given up on getting the 2 Gig to run reliably easily. Another question, does anyone know if any of the other bioses unlock the memory timings or voltages. If I could increase the voltage to 2.6V or...

Ok, I was able to get 2GB PC3200 to run stable if I use A64 Tweaker to reduce the memclock to 166 from 200. I found out that you cannot adjust CAS latency on these systems. With this memory it is fixed at 3 and locks if you change it...

Not to beat a dead horse here, but I am still using my M6805 and have just tried upgrading the memory to 2GB. I am using 2 sticks of Crucial Rendition PC3200 DDR 400Mhz SODIMM (RM12864X40B). I believe that they are 2.5V and show...

Was just checking the E-Machines support page for my M6805 and I noticed that there is now an updated driver for the Broadcom Network Driver (the wireless card I am assuming) version...

Here is a chart of some of my temps from today. Where was this program when I was having all my shutdown issues? To think that I am actually wishing that it would shutdown cold to see what temps it might capture before lights...

Yeh, I tried the pre-release rmclock also and got the same values as the standalone. I am running a stock M6805 with XP-SP1 and the 0F08 bios update from the emachines site. I guess we need a few other people to check it out and...

No shutdowns yet since the last time I tightened down the heatsink screws. Now that we can monitor the temp of the cpu what temps are you guys running on AC power. Temp monitoring program (with logging every second - needs a time...

Well my experience with this problem is that it is definitely contact issues with the heatsink to the CPU. I have never completely removed my heatsink to clean / reapply paste, but I find that after every 2-4 months the fan will start...

Fairly happy with mine. At one point it did have shutdown issues but they had disappeared completely after upgrading the bios and adjusting / tightening the screws that hold the cooling assembly. One of the four was loose and I...